The GUI informs at any time about the current version
Obtain a USB memory stick (formatted to FAT-32) with the wished software version. Insert the Memory Stick into the USB socket and turn on the Drive Unit. Wait for a minute and a new software version is loaded into Apollon PLC.
The device display / GUI informs at any time the current version # in upper left corner.
If you want to upgrade the software. Then obtain a USB memory stick from PerfuseCell / Cronus-PCS with the preferred version whenever needed. Insert the Memory Stick into the USB socket and turn on the Drive Unit. Wait for a minute and the new software version is loaded into the Apollon PLC.
| Software version # | Changes, improvements, | Date |
| C.65 | Improvement of average ml/min calculation (6 times more points per minute included) | 2017-10-10 |
| C.66 | Change in the text of Graphic-User-Interface | 2017-10-31 |
| C.67 | Introducing Clotho-2 with new user interfaces (channel 2 and a overview user interface) | 2017-12-05 |
| C.68 | Changes to the manual vacuum and pressure bottom's. More power full for manual testing of the SUP/SUE | 2017-12-19 |
| C.69 | Change to the the cleaning cycle speed/ramp steepness to insure a better chance of clearing the straws/lumen path | 2018-03-01 |
| C.70 | Change in the test in the user interface and now an improved sinusoidal waveform | 2018-03-05 |
| C.71 |
Change, now with 4 different wave-forms and amplitude control 50 % to 100 % stroke length - manual upgrade |
2019-11-15 |
| C.76 |
Many improvements - manual upgrade |
2023 |
| C.80 |
Clotho upgrade for Thalia and Clio SUPs now with automatic cleaning - manual upgrade |
2024 |
| C.81 |
Data acquisition - require the device unit is returned to factory in Denmark |
2025 |