Harmonia

Dual thermal control of SUBs and SUMs

Dual channel thermal controller for endotherm based reaction like cultivation in bioreactors in size 0,5 - 50 litre thermal mass. Such as the CellVessel SUBs or CellMiscelatore SUMs from www.cercell.com or CP-SUBs from www.prolifecell.com

Product, model name

Harmonia

Purpose

Heating, thermal control

Hephaestus cabinet size

U2

Degree resolution

15 bit - 0,03 °C

Power supply

110 - 230 VAC, 10 amp

Weight, kilo

3,5

Design

Dual independent channel controller with build-in Apollon PLC. Harmonia can operate in a stand-alone setup, autonomous or chained with other Cronus components or PCS. Designed for electrical heating element operating at either 110 or 230 VAC. Elements can be heating rods or flexible blankets of same voltage as supply voltage. Power control with Solid-State-Relay (SSR) for unlimited lifetime.

In & Out electrical features - front panel mounted

  • 1 x 110 - 230 VAC power inlet, IEC standard male with ground, fuse tray, red button breaker, max 10 amp
  • 2 x 110 - 230 VAC controlled power outlet, IEC standard female with ground – one each channel, max 10 amp in total
  • 2 x Pt100 sensor connection with 4 leg M12/RKF socket
  • 1 x USB socket
  • 1 x RJ45 socket

Communication

  • Internal 5” touch sensitive TFT display hooked on the Apollon PLC
  • External connection to PC, PADs or smart-Phones via Wi-Fi for programming and info from the built-in webserver
  • USB port for USB adapter with software upgrades / Wi-Fi connection 
  • RJ45 port for LAN, ModBus, OPC via IP/TCP and for firmware upgrades and data acquisition

Harmonia in U2 Hephaestus Stainless Steel cabinet. Shown with thermal control devices: Heating-Support-Foot (HSF) for 500 ml SUB, SUM and Heating-Support-Foot (HSF) for the 3,2 liter SUB, SUM. The far right photo show the orange Electrical-Heating-Blanket (EHB) and the empty shining Heating-Support-Foot (HSF) .

Programming

Any of the 3 PID parameters are fully accessible and free to program typically according to requirement of the thermal mass of your system (PID = Proportional, Integral and Derivative influence).

Supplied with:

  • 2 x Pt100 sensors (one of the dimensions: OD2x100, OD2x150, OD3x200, OD3x250, OD5x350 mm with integrated M12 RKF connector)
  • 2 x thermocouple cable with M12 RKF connector in each end
  • No Electrical-Heating-Blanket or Heating-Support-Foot included - choose your desired extras

Supplied with two Platinum thermocouples of the size that fits your purpose. Choose your preferred thermal control device for your process. The far right photo show the orange Electrical-Heating-Blanket (EHB) and the shining Heating-Support-Foot (HSF) mounted with a 3,2 liter SUB.

Extras to choose from:

Communication – check out specific folder on this subject under Support
Price, availability and p/n – look under Commerce